K 10
svn:author
V 4
manu
K 8
svn:date
V 27
2020-06-18T23:23:21.416852Z
K 7
svn:log
V 1131
MFC r356888, r356891

r356888:
arm: allwinner: Fix padconf for interrupts information

Add a eint_bank member to the allwinner_pins structure.
On Allwinner SoCs not all pins can do interrupt.
Older SoC (A10/A13 and A20) there is a maximum number of interrupts
set to 32 and all the configuration is done in the same registers.
While on "newer" SoCs (>=A31) interrupts registers are splitted per
pin bank (i.e. all interrupts available in bank B will be configured
with a sets of registers and the one in bank G in another set).
While here set the names to all interrupts function to
pX_eintY where X is the bank name and Y the interrupt number.

To whom ever in the future look at the H5 manual and notice that the bank F
have interrupts support : This isn't true, trust me.

r356891:
arm: allwinner: Add GPIO Interrupt support

Not all pins in Allwinner have interrupts support so we rely
on the padconf data to add the proper caps when pin_getcaps is called.
The pin is switch to the specific "eint" function during setup_intr and
switched back to its old function in teardown_intr.
Only INTR_MAP_DATA_GPIO is supported for now.

END